Capable entry-level 3D printer with room to grow
Assembly is straightforward but requires care with the ribbon cable and power cable routing. The frame may have sharp metal edges from cutting. First power-on and calibration succeed without issues, and printing with PLA+ works reliably. The printer runs near-vanilla open-source Klipper with a simple interface, though the manual needs improvement. Using OrcaSlicer from GitHub is recommended over the outdated USB copy. After 47 days and about 300 print hours, no major issues have appeared, making it a solid choice for beginners seeking an affordable, functional machine.
Pros
- + easy assembly
- + reliable first print
- + near-vanilla Klipper
- + simple interface
- + no major issues after 300 hours
Cons
- − sharp metal edges on frame
- − power cable routing must be done before securing power supply
- − manual needs work
- − outdated USB software copy
AI-assisted summary of a verified Amazon customer review.
· July 2, 2025 · United States
Read original on Amazon ↗
Good quality printer with strong customer support
This printer uses metal linear rails and a load cell for bed leveling, and print quality is impressive, including small 32mm items. Setup and calibrations are simple. After a nozzle crash into the bed, a display error caused a bootloop. Support offered replacement parts, then a free new printer with a new warranty, and expedited parts arrived before the return window. The motherboard swap was easy and the printer booted right up. The Ace version fixes issues from older models and adds upgrades like an accelerometer and load cell.
Pros
- + metal linear rails
- + load cell bed leveling
- + impressive print quality
- + simple setup and calibrations
- + strong customer support
- + free replacement parts and printer offered
- + easy motherboard swap
- + Ace version fixes older issues and adds upgrades
Cons
- − nozzle drove into bed
- − display error and bootloop
AI-assisted summary of a verified Amazon customer review.
· May 2, 2026 · United States
Read original on Amazon ↗
Major quality and reliability issues reported
Multiple units show serious defects: firmware updates cause blue screens that are hard to recover from, and some printers arrive with software that prints off-center and breaks i3 compatibility. Bed temperature drops during printing, causing adhesion loss and failed prints. TPU printing leads to clogs and extruder damage. Other faults include failed SD card connectors, stripped power supply threads, and layer misalignment. Out of five printers, four were defective. Support is slow and unhelpful. A potentially good printer held back by engineering and support problems.
Pros
- + Potentially great printer
Cons
- − Firmware updates cause blue screens
- − Prints off-center and breaks i3 compatibility
- − Bed temperature drops during printing
- − TPU printing causes clogs and extruder damage
- − Failed SD card connectors
- − Stripped power supply threads
- − Layer misalignment
- − Slow and unhelpful support
- − High defect rate
AI-assisted summary of a verified Amazon customer review.
· May 9, 2023 · United States
Read original on Amazon ↗
Open-source printer with large build volume and remote monitoring
This open-source 3D printer worked out of the box and produced decent prints the same day. It uses Orca Slicer and tweaked Klipper, runs on a network, and includes the printer's 3D files for replacement or modified parts. Setup takes a few hours with good directions and how-to videos. The large build volume, Ethernet and Wi-Fi, webcam, PEI plate, and 700 mm/s speed meet the need for remote printing and monitoring. Print quality is better than a smaller bed-slinger, making it easier to print more often. Future upgrades like an enclosure or tool changer are possible.
Pros
- + Worked out of the box
- + Open-source software and hardware
- + Large build volume
- + Ethernet and Wi-Fi connectivity
- + Remote monitoring via webcam
- + Included PEI plate
- + 700 mm/s print speed
- + Good print quality
- + Upgradable
Cons
- − Setup takes a few hours
AI-assisted summary of a verified Amazon customer review.
· July 13, 2025 · United States
Read original on Amazon ↗
