Hardens well for leveling shop floor
This epoxy patch and resurfacer was used to level out a shop floor beneath the legs of a four-post car lift. It sets hard, and based on the manufacturer's claims about holding pressure, it is expected to hold up very well. Durability over time remains to be seen.
Pros
- + sets hard
- + expected to hold pressure well
Cons
- − long-term durability unconfirmed
AI-assisted summary of a verified Amazon customer review.
· September 3, 2024 · United States
Read original on Amazon ↗
Easy to apply and works for warehouse floors
Application is easier than expected and performs well so far. Applied on a Friday, and by Monday the area was ready for forklifts to drive on again. Using the proper tools makes the job easier, specifically a small 3-gallon bin and a good spatula.
Pros
- + Easy application
- + Ready for forklift traffic by the next business day
- + Works well so far
AI-assisted summary of a verified Amazon customer review.
· March 23, 2023 · United States
Read original on Amazon ↗
Incomplete Kit and Poor Value
The package contains only hardener, requiring additional resin to mix. The advertised one-gallon quantity is misleading; the can is half-filled with fine sand labeled aggregate, yielding little more than half a gallon when mixed. Application instructions are absent except for a thickness range of 1/8 to 1/4 inch. The mix is dry, difficult to trowel smoothly, and rough due to a high sand content. The epoxy amount is too low, resulting in a dry consistency. Comparable materials can be purchased separately for more volume at lower cost.
Cons
- − Only hardener included, resin must be bought separately
- − Advertised one gallon is actually about half a gallon
- − Can half-filled with fine sand
- − No application instructions beyond thickness range
- − Difficult to spread or trowel smoothly
- − Rough texture due to high sand content
- − Too little epoxy in the mix
- − Poor value compared to buying components separately
AI-assisted summary of a verified Amazon customer review.
· June 25, 2023 · United States
Read original on Amazon ↗
Effective for warehouse floor crack and gouge repair
This stiff epoxy filler works well for large cracks and missing sections in warehouse and shop floors. It is easy to apply and does not dry as quickly as liquid epoxies. It is not drivable within an hour as a promotional video suggests; applied on a Friday, it was ready for forklifts by Monday morning. It has filled finger-width cracks up to 4-inch deep by 8-inch wide gouges successfully. Mixing is somewhat difficult because sand must be added in portions, and the product is very sticky, so gloves and protective gear are recommended.
Pros
- + easy to apply
- + does not dry fast like liquid epoxies
- + works on a range of crack and gouge sizes
Cons
- − not drivable within an hour
- − somewhat difficult to mix
- − very sticky
AI-assisted summary of a verified Amazon customer review.
· May 16, 2025 · United States
Read original on Amazon ↗
Highly Rated Product
This product is described as amazing and is rated five out of five. It is a verified purchase. No specific features, drawbacks, or use cases are mentioned.
Pros
- + Rated five out of five
- + Described as amazing
AI-assisted summary of a verified Amazon customer review.
· July 20, 2026 · United States
Read original on Amazon ↗
