Sturdy Generator Tray with Plenty of Room
This tray accommodates a Yamaha EF3000iS generator with ample space. It is very sturdy and easy to mount, making it a good product for do-it-yourself installation. The design offers plenty of room for the generator, and the mounting process is straightforward. Overall, it performs well for this use case.
Pros
- + very sturdy
- + easy to mount
- + plenty of room
- + good product
- + DIY-friendly
AI-assisted summary of a verified Amazon customer review.
· May 31, 2026 · United States
Read original on Amazon ↗
Strong tray, weak hardware and misaligned holes
The tray itself is strong and well made, but the included hardware is poor. The bolts and nuts are weak and cheap, and several snapped during assembly. Some bolt heads were too tight for the correct socket, suggesting inconsistent quality control. The holes in the top brackets that fit over the poles did not line up, requiring bending with a C-clamp to bolt them up. Marking all holes after positioning the tray, then removing it to drill, worked well. Buying better hardware before assembly is recommended.
Cons
- − weak cheap bolts and nuts
- − bolts snapped during assembly
- − bolt heads too tight for proper socket
- − top bracket holes did not line up
AI-assisted summary of a verified Amazon customer review.
· May 31, 2026 · United States
Read original on Amazon ↗
Solid Generator Tray for Onan-Cummins 4500i
This tray works well for an Onan-Cummins 4500i after some fitting and modification. It has been used about six times and has performed without issues. It has held up on miles of washboard roads and remains as solid as when it was first built. The setup required a couple of attempts to fit and modify correctly, but once done, it proved to be a reliable solution.
Pros
- + performs flawlessly
- + remains solid on rough roads
- + durable after multiple uses
Cons
- − required fitting and modification
AI-assisted summary of a verified Amazon customer review.
· September 7, 2026 · United States
Read original on Amazon ↗
Sturdy Universal Trailer Tray for Teardrop Camper
The trailer tray is sturdy and well built, with thoughtful attachment points that make it adaptable to nearly any frame setup. Installation takes about an hour solo, and a cordless drill speeds things up since the universal bolts are longer than needed. It fits a teardrop camper with a large storage tray and propane tank, though the tank must be angled to remove. The system could be raised a few inches with drilled holes, but that is not advised for heavy loads. The box weighs around 60 lbs and is awkward to move, but it adds valuable storage.
Pros
- + sturdy and well built
- + universal attachment points
- + adaptable to nearly any frame
- + adds extra storage
Cons
- − installation takes about an hour solo
- − universal bolts longer than needed
- − box weighs around 60 lbs and is awkward to move
- − propane tank must be angled to remove
AI-assisted summary of a verified Amazon customer review.
· July 7, 2022 · United States
Read original on Amazon ↗
