Fast, reliable multi-color printing with easy setup
The Creality Hi Combo is a multi-color 3D printer that arrives 95% pre-assembled, allowing quick and painless setup and printing within a short time. It suits those upgrading or returning to 3D printing without a long build process. The printer delivers a combination of speed, reliability, and multi-color capability at a reasonable price. It is a strong option for hobbyists wanting to try multi-color printing without constant tuning or complicated setups. A custom dog scooper was designed and printed successfully.
Pros
- + 95% pre-assembled for quick setup
- + fast printing
- + reliable
- + multi-color capability
- + reasonable price
- + no constant tuning or complicated setups
AI-assisted summary of a verified Amazon customer review.
· April 27, 2026 · United States
Read original on Amazon ↗
Printer and CFS Failed Quickly, Poor Support
This printer worked for a few prints before both the print head and the CFS failed. It can only print in one color, requiring manual filament removal each time. Print quality is imprecise, with about half of all prints failing completely and the rest having a rough finish. Support repeatedly requested proof and sent unrelated troubleshooting links, wasting time without resolving the issues. A different printer from another brand proved more capable and reliable.
Cons
- − print head and CFS failed almost immediately
- − can only print in one color
- − manual filament removal required
- − imprecise printing with frequent failures
- − rough finish on successful prints
- − unhelpful customer service
AI-assisted summary of a verified Amazon customer review.
· August 27, 2026 · United States
Read original on Amazon ↗
Great Value Multicolor 3D Printer with Easy Auto Leveling
This 3D printer delivers excellent print quality, as shown by a full-sized Mandalorian helmet printed successfully on the first try. Auto leveling is simple: press calibrate, wait about 14 minutes, and it's done. A CFS unit is recommended for easier use. The extruder cover can come loose during shipping, so check it is fully attached. The included glue stick works like a normal glue stick; it is thick but caused no nozzle clogs after roughly 100 hours of printing. Adhesion is fine without it. Best purchased on sale, as full price is steep.
Pros
- + excellent print quality
- + easy auto leveling
- + CFS makes life easier
- + no clogging after 100 hours
- + good value on sale
Cons
- − extruder cover can come loose during shipping
- − full price is steep
AI-assisted summary of a verified Amazon customer review.
· January 12, 2026 · United States
Read original on Amazon ↗
Sturdy, Beginner-Friendly 3D Printer with Advanced Software
This printer is sturdy and well engineered, with straightforward assembly and troubleshooting. It runs on 110–240V, so only the plug needs changing. Beginner mistakes, such as loading filament incorrectly or misconfiguring PETG as PLA, did not damage the printer. It offers many configuration settings and tests for generic filament, advanced printing software, free models, and extensive wiki documentation. A modeling section allows creating custom designs. It is considered worth the money and recommended for beginners and enthusiasts.
Pros
- + sturdy and well engineered
- + straightforward assembly and troubleshooting
- + runs on 110–240V
- + forgiving of beginner mistakes
- + many configuration settings and tests
- + advanced printing software
- + free models and extensive wiki documentation
- + includes a modeling section
Cons
- − heavier than expected
- − requires some assembly
AI-assisted summary of a verified Amazon customer review.
· March 30, 2026 · United States
Read original on Amazon ↗
Great value printer with large build volume and multicolor
This printer offers a 300x300x300mm build area and a four-spool CFS for multicolor printing. It has successfully printed PA, ASA, ABS, PETG, and PLA, including a 72-hour nylon cold air box and ASA door pockets, with no bed adhesion problems. The case exhaust fan is louder than the printer itself. One extruder clog occurred and was resolved by swapping in a spare. Documentation on supported materials is limited; customer support confirmed PA-CF requires a different nozzle, which was purchased. Overall, it is considered great for the money.
Pros
- + large 300x300x300mm build area
- + four-spool CFS for multicolor
- + prints PA, ASA, ABS, PETG, PLA
- + no bed adhesion issues
- + good value for money
Cons
- − case exhaust fan louder than printer
- − one extruder clog
- − limited documentation on supported materials
AI-assisted summary of a verified Amazon customer review.
· December 7, 2025 · United States
Read original on Amazon ↗
